undefined
+
  • undefined

MNS Low-voltage Fixed Switchgear

The structure is compact, and the volume is only about1/3-1/5 of that ofdomestic European style box transformers of the same capacity, greatly reducing the floor area.

Keywords:

MNS Low-voltage Fixed Switchgear

WhatsApp:

Product Description

  • 产品描述
  • Overview

    ● The structure is compact, and the volume is only about1/3-1/5 of that ofdomestic European style box transformers of the same capacity, greatly reducing the floor area.

    ● Fully sealed, fully insulated structure, no insulation distance required, reliable protection of personal safety.

    ● High voltage wiring can be used for both ring networks and terminals, with flexible power supply methods and high reliability.

    ● Excellent transformer performance: low loss, low noise, low temperature rise;Strong overload capacity,short circuit resistance, and impact resistance.

    ● Meet various low-voltage feedback requirements, and can be selected according to the plan or designed by oneself.

    ● There are two types of cable head:200A elbow plug and 600A "T" fixed cable connector. All insulated zinc oxide Lightning rod can be configured.200A cable can be plugged in and pulled out on load, and can also act as an isolating switch.

    Normal condition

    ● Application:Power distribution, motor control

    ● Executive standards:lEC439,Gb72511

    ● Environmental temperature:-5℃~40°CWhen the relative humidity of the environment is40 ℃, it should not exceed 50%. At lower temperatures, higher relative humidity is allowed,which may cause occasional condensation (such as 90% at 20C)

    ● Installation location:indoor

    ● Altitude:≤2000m

    ● lf the above conditions cannot be met, the user should propose to the manufacturer whenplacing an order.

    Main technical parameters

    ● Form of incoming and outgoing lines: cable/Bus duct (bridge)

    ● Cable entry and exit: top/bottom

    ● Wiring form: in front of/behind the cabinet

    ● Protection level:IP30,IP40,IP54

    ● Functional unit isolation form: full or partial isolation

Product Inquiry

We highly value your feedback and inquiries. If you have any questions about our products or services, please fill out the form below, and we’ll get in touch with you as soon as possible.